NiAl95/5 Thermal Spray Wire
Ni-Al Arc Spray wire for bond coats and one-step restoration, with confirmed composition data including about 93% Ni.
Thermal spray wires
SS420 Thermal Spray Wire
Martensitic SS420 wire for Arc Spray deposits with high hardness, strong bonding, low shrinkage and suitability for wear-resistant dimensional repair.
Published coating hardness of HRC 40-45
Dense, well-bonded deposit with low shrinkage
Published as having good post-spray machinability
Product description
SS420 is a martensitic stainless wire for Arc Spray, with a composition of 13% Cr, 1% Si, 1% Mn and balance Fe. CQ can confirm carbon content against the requested application. The deposit is described as dense, well bonded, corrosion resistant, low in shrinkage and readily machinable.
Coating data include HRC 40-45 hardness, 6,500 psi bond strength, a deposit rate of 10 lbs/hr/100A and 70% efficiency. Supply options are 1.6 or 2.0 mm on a 15 kg D300 spool, plus 3.17 mm coils from 20 to 400 kg. CQ can confirm surface preparation, cleaning and roughening steps for the requested application.
Repairs machine elements and restores dimensions with a hard, wear-resistant, well-bonded and low-shrinkage deposit that can be machined after spraying to the required tolerance.
Technical specifications
- Published composition
- Cr 13%; Si 1%; Mn 1%; Fe balance
- Carbon content
- Đang cập nhật / Updating
- Coating hardness
- HRC 40-45
- Coating bond strength
- 6,500 psi
- Deposit rate and efficiency
- 10 lbs/hr/100A; 70%
- Spool wire
- 1.6 / 2.0 mm; D300; 15 kg/spool
- Coil wire
- 3.17 mm; 20-400 kg/coil
Typical applications
Wear resistance
Hard martensitic coating for wear-exposed surfaces.
Dimensional repair
Arc Spray dimensional repair where post-machining is required.
Machine elements
For machine elements needing well-bonded, low-shrinkage deposits.
Post-coat machining
Machinable deposit for final size finishing.
Related products
NiCrTi 45CT Thermal Spray Wire
NiCrTi 45CT wire for protecting boiler tubes against sulfidation and sulfur-vanadium atmospheres; CQ can confirm the operating spray process for the requested application.
Zinc Wire Spray
High-purity zinc wire for sacrificial-anode protection of steel in atmospheric and seawater service, with a published Zn assay.
Thermal Arc Spray Wire
Solid Ni-Cr-Mo-Fe-Cb/Ta Arc Spray wire defined by the confirmed composition table, with HRB 92 hardness, 48.26 N/mm² bond strength and three published diameters.