NiAl95/5 Thermal Spray Wire
Ni-Al Arc Spray wire for bond coats and one-step restoration, with confirmed composition data including about 93% Ni.
Thermal spray wires
NiCrTi 45CT Thermal Spray Wire
NiCrTi 45CT wire for protecting boiler tubes against sulfidation and sulfur-vanadium atmospheres; CQ can confirm the operating spray process for the requested application.
Fully published Ni-Cr-Ti composition
Coating data include HRC 30-35 and 7,000 psi bond strength
White-metal cleaning and 24-mesh roughening guidance
Product description
NiCrTi 45CT is published with 56.3% Ni, 43% Cr and 0.7% Ti for boiler-tube protection in high-temperature sulfur, vanadium and sulfidation service. Reported coating data include HRC 30-35 hardness, 7,000 psi bond strength, a deposit rate of 10 lbs/hr/100A, 85% efficiency and coverage of 0.8 oz/ft²/mil.
Surface-preparation guidance includes white-metal cleaning and roughening with 24-mesh grit or rough machining before deposition. Wire is offered at 1.6 mm or 14 gauge in 10 kg, 15 kg or custom packages. CQ can confirm the spray process and how material data should be applied for the requested application.
Protects boiler tubes in high-temperature sulfidation, sulfur or vanadium atmospheres and related hot-corrosion conditions.
Technical specifications
- Nominal composition
- Ni 56.3%; Cr 43%; Ti 0.7%
- Coating hardness
- HRC 30-35
- Coating bond strength
- 7,000 psi
- Deposit rate
- 10 lbs/hr/100A
- Efficiency and coverage
- 85%; 0.8 oz/ft²/mil
- Wire size
- 1.6 mm / 14 ga
- Packaging
- 10 kg, 15 kg or custom
- Operating spray process
- Đang cập nhật / Updating
Typical applications
Boiler tubes
Protects boiler tubes from high-temperature sulfidation.
Superheater sections
For sulfur/vanadium atmospheres in boiler superheater sections.
Hot corrosion
Coatings for severe boiler gas corrosion conditions.
Power-plant maintenance
For heat-exposed surface maintenance in thermal power plants.
Related products
SS420 Thermal Spray Wire
Martensitic SS420 wire for Arc Spray deposits with high hardness, strong bonding, low shrinkage and suitability for wear-resistant dimensional repair.
Zinc Wire Spray
High-purity zinc wire for sacrificial-anode protection of steel in atmospheric and seawater service, with a published Zn assay.
Thermal Arc Spray Wire
Solid Ni-Cr-Mo-Fe-Cb/Ta Arc Spray wire defined by the confirmed composition table, with HRB 92 hardness, 48.26 N/mm² bond strength and three published diameters.