For HVOF
Cr3C2-25NiCr
Cr3C2-25NiCr powder for HVOF carbide coatings with wear, erosion and hot-corrosion resistance in high-temperature service.
Thermal spray powders
Hermus-13
Hermus-13 powder for Laser Cladding of dies, tooling and components that require high hardness after restoration.
Suitable for hard cladding on dies and tooling
Laser Cladding helps control the heat-affected zone
Can be finish-machined after cladding
Product description
Hermus-13 is an iron-based/tool-steel powder supplied by Huayin for Laser Cladding, aimed at overlays with high hardness after restoration. The spherical morphology keeps powder feeding stable, while the metallurgical bond characteristic of laser cladding gives a well-bonded, low-porosity layer on dies, tooling and mechanical parts.
The material suits cutting edges, lightly impacted surfaces and local wear zones needing a controlled hard layer. After cladding, the coating can be finish-machined to the working dimension. Laser parameters and heat input must be tuned to balance hardness against the cracking tendency of tool-steel systems.
Applied to dies, cutting edges, lightly impacted surfaces, local wear zones and mechanical parts needing a controlled hard cladding layer.
Technical specifications
- Main chemistry
- Fe-based / tool-steel alloy system
- Typical particle size
- 45-105 um / theo đầu cấp bột laser
- Powder morphology
- Bột hợp kim dạng cầu hoặc gần cầu, độ chảy ổn định
- Suitable process
- Laser Cladding
- Packaging
- 5 kg / 10 kg / 25 kg, hút ẩm theo tiêu chuẩn nhà sản xuất
Related products
For HVOF
73WC-NiCr
73WC-NiCr HVOF powder combines tungsten carbide hardness with a NiCr matrix for wear resistance in corrosive environments.
For HVOF
WC-10Co-4Cr
WC-10Co-4Cr HVOF powder creates dense carbide coatings for sliding wear, particle abrasion and corrosion in industrial equipment.
For HVOF
316
316 stainless powder for HVOF or thermal spray coatings where Fe-Cr-Ni-Mo corrosion resistance and stainless surface restoration are required.