NiAl95/5 Thermal Spray Wire
Ni-Al Arc Spray wire for bond coats and one-step restoration, reported with about 93% Ni rather than a composition inferred from the 95/5 name.
Thermal spray wires
Zn85Al15 Spray Wire
Zn85Al15 Arc Spray wire for atmospheric steel protection with nominal Zn 85%/Al 15%; the conflicting detailed assay is not used.
Clear nominal identity of Zn 85% / Al 15%
Published 2.0 or 3.0 mm wire at 15 kg/spool
Arc Spray protection of steel against atmospheric corrosion
Product description
The product title, identity and body define Zn85Al15, nominally 85% Zn and 15% Al. It is used in Arc Spray protection of atmospheric steel, combining zinc sacrificial or cathodic protection with the surface stability contributed by aluminium. Published supply data are 2.0 and 3.0 mm wire at 15 kg per spool.
The detailed assay table repeats pure-zinc data and contains no aluminium, so it cannot represent Zn85Al15. This record excludes that inconsistent assay and does not reuse pure-zinc melting point, density or tensile values as alloy properties. The nominal composition is based only on the product designation and the consistent identity stated in the page body.
Provides atmospheric corrosion protection for steel structures by combining zinc sacrificial protection with the surface stability contributed by aluminium in an Arc Spray deposit.
Technical specifications
- Designation-based composition
- Zn 85% / Al 15%
- Wire diameter
- 2.0 / 3.0 mm
- Packaging
- 15 kg/spool
- Process
- Arc Spray
- Source-data note
- Detailed pure-zinc assay is inconsistent and excluded
Related products
NiCrTi 45CT Thermal Spray Wire
NiCrTi 45CT wire for protecting boiler tubes against sulfidation and sulfur-vanadium atmospheres; the source does not identify the operating spray process.
SS420 Thermal Spray Wire
Martensitic SS420 wire for Arc Spray deposits with high hardness, strong bonding, low shrinkage and suitability for wear-resistant dimensional repair.
Zinc Wire Spray
High-purity zinc wire for sacrificial-anode protection of steel in atmospheric and seawater service; the published assay contains no aluminium.